I just saw this featured in our local newspaper. It seems like a great price at about $200. I too am curious how well it works. Only down side ks that you need an android phone to use it.
Down side android? Nah
I’d like to see a cordless caulking gun review. I’ve seen offerings from Makita, Milwaukee, Dewalt and Ryobi. In fact Makita offers three different configurations, traditional, barrel and enclosed (XGC01Z, XGC01ZB, XGC01ZC- respectively).
I am embarking on a project in the coming weeks to replace all of the baseboards and trim in my house, while adding crown moulding. I am seriously contemplating a 18v caulking gun for fear of ending up with a permanent claw from manually pumping what’s sure to be many tubes of caulk.
Of course being entirely on the Makita platform already, I am partial to one of the Makita models, however lately I find myself frustrated, paying more for the most of the Makita line of cordless tools that other manufacturers and might use this time to begin the transition.
Mike, take a look at the M12 gun. For caulk it has more than enough power and you can turn it down to get a nice thin bead. The lighter weight is also helpful if you’re working overhead. The 18v models are more appropriate for jobs where you’re squeezing out large quantities of material like PL adhesive on 4x8 sheets all day long.
I can’t compare to the other models unfortunately.
Thanks RKA for the recommendation!
Tough system radio, after it’s dropped from a Crain. That thing is tough and in my opinion it sounds better than all other jobsite radios.
As a PB Swiss fanboy (I blame Toolguyd!), I see there’s now an Insider Stubby Ratcheting Screwdriver, among the PB Swiss new stuff for 2017. This could be worth reviewing, next time there’s a Toolguyd review of ratchet screwdrivers or EDC tools.
How about extensive reviews on the Makita subcompact kit and the Hitachi Triple Hammer? Allusions have been made that reviews are forthcoming but those were months ago. Here’s hoping!
Mr. TOOL GUYD
Please: Information about floor and table DRILL PRESSES.
THANK YOU:
Hi Stuart, Ben. I know you’re probably very busy, especially now with nps 17, but would you consider reviewing ISOtunes pro earbuds. Thanks.
I’m actually in the market for another Bluetooth hearing protection solution myself. My previous kludge stopped working and I’ve had to go back to ear buds under hearing protectors – which frankly sucks.
The ISOtunes have been on my radar and I’ve been watching what the other tool reviewers think. I’ve seen a lot of “oh, I’m trying out these ISOtunes pro ear buds today,” but I haven’t seen anybody actually follow up and say how they worked.
When we were hanging out at the airport after the Milwaukee event, Paul (Toolpig) let us try his Bose noise canceling headphones, so now I’ve been spoiled. I think they were these ones:
https://www.amazon.com/Bose-QuietComfort-Wireless-Headphones-Cancelling/dp/B01E3SNO1G
I’m not sure if they were the 25 or 35s
Hopefully the new Dewalt 20V chainsaw (DCCS620) and 20V fan (DCE511) are on your to-do list.
I’ll second the OBD too thing - with a side flavor of Mobile app tools. I recently bought the OBDlink system of BT scanner - there are many out there. But also a few devices like the NEW Innova handheld and Autel devices. That supposedly scan everything a Tech 2 or Ford Diag will do on cars older than 2014 - with updateable software. Just like the new Tech 3 standard.
Anyway - There are some new things out there in ODB scanners and if you work on cars as Hobby or Shadetree it would be nice to have a concentrated roundup. And I would offer to help if you wanted. I bet there’s a few others that would as well.
ALso wouldn’t mind a review of OPE cordless like the Dewalt vs Echo vs Ego ____________ whatever but that might be too subjective.
Uhm A new run at Ratchets IE basic hand ratchets. ONly because I am looking to replace 2 and don’t want to just punt to Proto or Snap ON for that. (or MAC I guess I should also throw MAC on there).
Maybe Other automotive tools - LIke Jacks, or Impact Wrenches - or something along those lines.
The IsoTunes and IsoTunes Pro are on sale at Rockler (I don’t know how long) for $50 and $80. The IsoTunes Pros are $10 cheaper than I can find anywhere else and the IsoTunes are on par with other stores at the sale price.
http://www.rockler.com/isotunes-pro-noise-isolating-bluetooth-earbuds-27-db-nrr
http://www.rockler.com/isotunes-noise-isolating-bluetooth-earbuds-26-db-nrr
I picked up a pair of the IsoTune Pros this morning and have used them for a few hours. They charged in an hour or so and paired easily with my phone. They work pretty much as well blocking noise as any other in ear foam protector I’ve used.
So far I have two issues:
-
I have to listen on the lowest and second to lowest volume level, anything else is too loud for me. This might just be my phone – or something I’m doing wrong. I’ll have to play with some other sources.
-
I’ve only listened to a few podcasts so far and the audio quality isn’t anything special – it’s adequate. I’ll try some music tomorrow.
Give me a week or so and I’ll probably write a formal review.
Thanks.
Would you be able to find out if/when it will be available in black (I saw one of the questioners on Amazon asked about black, and the company responded that it will be available “later” this year).
I know you’ve got more than enough to do given the recent surge in home remodeling and new tools. But I have recently had need for two devices I’ve never researched prior to this: laser levelers (the cross-beam types) and IR sensors of the sort you would do a heat loss audit with. I don’t think I’ve ever seen either reviewed in depth anywhere but the manufacturers websites and you can predict their comparative analysis.
Gary
Has anyone seen/bought the new toolbags/organiser from wera “wera2go”, are they any good ,I have a number of their sets and like the idea of velcroing the most commonly used to the outside of the bag
I’ve been working on cross-beam laser line levels, mainly Bosch. I haven’t looked at other brands, but so far I’ve been quite pleased with Bosch experiences.
If you have a particularly urgent need, I can try to help you via email.
With IR sensors, how sophisticated are you interested in? IR thermometers can be used, but Thermal imagers are much more capable. They’re also quite pricey.
I tried to show what different classes of thermal imaging equipment can do, here: http://toolguyd.com/thermal-imaging-camera-image-quality-comparison/
Thank you.
For cross beams, it occurred to me that the option to turn the crossbeam such that it can place the cross on the floor to ease floor tile installation might be worthwhile. I assume the laser could care less which way its pointed, but it does need some sort of option that would make it possible to point it straight down.
I’m also interested in the green vs red discussions. I’m not even clear of the supposed advantages of either. One site says the green laser is more visible outside, which seems unlikely if you’re using it to build a fence. But as far as throw distance, it seems I’ve had some trouble with my ancient Craftsman laser level outside but its worked well inside. In doing more remodeling it would seem a crossbeam laser would be better.
Thx in advance for your advice.
Gary